- Test methods
Find relevant film and packaging tests of industry and trade in the following categories or the full-text search
- Expertise
Our areas of expertise are in line with the areas of interest of our clients.
- Order
Create test orders, print shipping documents, maintain data, load Seminar folders, find contacts, give feedback, and more
- Company
Evaluation of conformity
specific migration
Overall migration Sensory analysis
Expert opinion
Mechanical properties
Material analysis
optical tests
permeation
Information about tests
Puncture resistance, quasi-statical (temperature range - 40 up to + 120 °C)
Test performed with Zwick, tensile, compression tester, testing speed 25 resp. 100 mm/min. Tests carried out at room temperature for the standard price. For tests in the thermal chamber additional charge. The minimum and maximum technically feasible temperature ranges are dependent on the material. We will gladly advise you.
| test method: | Mechanical properties |
| Norms: |
DIN EN 14477 (2004-06) ASTM F 1306 (2021) |
| Needed sample size: | Minimum width 50 mm (ASTM F 1307) resp. 30 mm (DIN EN 14477), approx. 0,75 linear meters or 2 DIN A 4 sheets |
Standardprüfungen
penetration Test ASTM F 1306Test probe spherical, radius = 1,6 mm, vtest=25 mm/min. This test is particularly suitable for simulating the influences of coarse grain filling goods such as pasta, rice, granules.
Norm: ASTM F 1306
penetration Test DIN EN 14477
stylus: Diameter = 0,8 mm, spherical radius = 0,4 mm, vtest= 100 mm/min. This test is often used to simulate damages caused by sharp or pointed filling goods, such as ground coffee, nails or damages made by birds and rodents.
Norm: DIN EN 14477
back to overview Mechanical properties
Search examinations
Your contact person
Matthias Böhne
+49 441 94986-11
matthias.boehne@innoform.de
Examinations in this area
- Abrasion test of printings acc. Dr. Ruf method
- Air permeance (Gurley)
- Anti-dew (anti-fog) test
- Bending stiffness
- Blocking test/blocking strength
- Bond strength/peel force of laminates/multi-layer films/bondings (temperature range - 40 up to + 120 °C)
- burst resistance (Mullen) paper
- Characterisation of stretch hood and stretch wrapping films by hysteresis tensile test (only in stretching direction, e. g. generally in TD)
- Cling adhesion of stretch wrap films, agricultural stretch films, catering films, cling films and other cling films
- coefficient of friction COF
- Compression test on cups, buckets and basins (temperature range - 40 up to + 120 °C)
- Creep test
- Curling or flatness
- Curvature of films
- Determination of thickness of plastic films, aluminium foils, plane multilayer-materials and sheets
- Determination of weight
- Dimensions and repeating patterns on pouches, bags etc.
- Drop test of bags and pouches
- Evaluation of flatness, curvature and wrinkling of plastic films - strip method
- Fat permeability/fat density
- Fat-repellent impregnation of paper, lipophobic properties, Kit test
- FINAT peel adhesion
- Gelboflextest/Brugger KFT
- Grammage, yield
- Impact resistance by free-falling dart method (Dart Drop), staircase method
- Impact resistance by the free-falling dart method – Instrumented puncture test
- Indentation hardness (Shore hardness)
- Light fastness/ Wool (blue) scale - artificial irradiation by filtered xenon arc light
- Linear dimensional changes/dimensional stability/temperature stability of films and sheets
- Printing ink adhesion (Tesa test)
- Printing inks and coatings/ lacquers- Fastness;Suitability tests, resistance, hot alkali resistance
- Puncture resistance, quasi-statical (temperature range - 40 up to + 120 °C)
- Roll length (running meters)
- Roughness acc. Bendtsen
- Seal resistance of printings or coatings (heat resitance)
- Seal seam quality of PE- pouches or sacks (temperature range -40 to +120 °C)
- Seal strength, tensile test on strips (temperature range -40 to +120 °C)
- Sealing and welding properties of films, verification and comparison by laboratory sealing press
- Sealing seam strength of peelable bags, sacks, sealed packages with package testing device for determining the opening forces
- Sealing/welding properties of films/hot-tack test of films
- Shear strength of glued seams (temperature range - 40 to +120° C)
- Shrinkage of PE films (Betex tester)
- Shrinkage stress measurement of plastic films
- Smoothness according to Bekk
- Sterilisation/pasteurization in laboratory autoclave
- Storage test in temperature-controlled room under standard atmospheres23°C/ 50 % r.h.
- storage test/ accelerated aging in explosion protected heating chamber (controlled temperature)
- Storage test/accelerated ageing in climate chamber (controlled temperature and relative humidity)
- Storage test/accelerated ageing in lab drying oven or refrigerator (controlled temperature)
- Surface resistance/resistivity
- Tear resistance (also folded edges), (temperature range - 40 up to + 120 °C)
- Tear resistance (Elmendorf)
- Tensile test aluminium films
- tensile test films and laminates (temperature range -40 to +120 °C)
- Tensile test paper wet strength
- Tensile test paper, sealing strength of paper samples
- Tensile-impact strength
- Unpacking barness of cups (hollow bodies)
- Volume determination of carrier bags and pouches
- Water absorption of paper/Cobb test
- Weathering test - wet smear resistance of printed peat culture, substrate and humus packaging
- Wetting tension (e. g. for determination of Corona treatment intensity)
© 2025 Innoform GmbH Testservice