- Test methods
Find relevant film and packaging tests of industry and trade in the following categories or the full-text search
Compliance work specific migration (SML)/ NIAS- Screening/ Single substance analyses/ GC- MS- analysis Overall migration (OML), Sensory analysis, colour fastness, microbiology Expert opinions and assessments (e.g. damage analyses), custom tests Mechanical/ technological properties Material analysis optical tests permeation
- Expertise
Our areas of expertise are in line with the areas of interest of our clients.
- Order
Create test orders, print shipping documents, maintain data, load Seminar folders, find contacts, give feedback, and more
- Company
.
Evaluation of conformity
specific migration (SML)/ NIAS- Screening/ Single substance analyses/ GC- MS- analysis
Overall migration (OML), Sensory analysis, colour fastness, microbiology
Expert opinions and assessments (e.g. damage analyses), custom tests
Mechanical/ technological properties
Material analysis
optical tests
permeation
Information about tests
FINAT peel adhesion
Testing the adhesive strength of adhesive labels, self-adhesive labels, adhesive tapes, silicone coatings against standard glass plate or original surfaces/adhesives
| test method: | Mechanical/ technological properties |
| Norms: |
FINAT FTM 3 (2001-05) FINAT FTM 1 (2014-02) FINAT FTM 10 (2009-02) FINAT FTM 2 (2014-02) FINAT FTM 9 (2001-05) FINAT FTM 11 (2001-05) |
| Needed sample size: | at least 20 labels and possibly a linear meter of the original substrate |
Standardprüfungen
Finat FTM 01: Peel adhesion (180°)Peel adhesion (180°) at 300mm per minute
Norm: 180
Finat FTM 02: Peel adhesion (90°)
FTM 2 Peel adhesion (90°) at 300mm per minute
Norm: 90
Finat FTM 09: loop- tack
Testing of loop- tack properties
Norm: loop
Finat FTM 10: quality of silicone coatings
Peel adhesion test for evaluation of the quality of silicone coatings for adhesive laminatese by determination of peel adhesion of a self- adhesive tape
Norm: Silikonbeschichtung
Finat FTM 11: silicone coatings- subsequent adhesion
Test to evaluate the influence of a release surface on the adhesive properties. The adhesive strength of a standard adhesive tape against float glass without and after contact with the release surface is compared.
Norm: 180
back to overview Mechanical/ technological properties
Search examinations
Your contact person
Matthias Böhne
+49 441 94986-11
matthias.boehne@innoform.de
Examinations in this area
- Abrasion test of printings acc. Dr. Ruf method
- Air permeance (Gurley)
- Anti-dew (anti-fog) test
- Bending stiffness
- Blocking test/blocking strength
- Bond strength/peel force of laminates/multi-layer films/bondings (temperature range - 40 up to + 120 °C)
- burst resistance (Mullen) paper
- Characterisation of stretch hood and stretch wrapping films by hysteresis tensile test (only in stretching direction, e. g. generally in TD)
- Cling adhesion of stretch wrap films, agricultural stretch films, catering films, cling films and other cling films
- coefficient of friction COF
- Compression test on cups, buckets and basins (temperature range - 40 up to + 120 °C)
- Creep test
- Curling or flatness
- Curvature of films
- Determination of thickness of plastic films, aluminium foils, plane multilayer-materials and sheets
- Determination of weight
- Dimensions and repeating patterns on pouches, bags etc.
- Drop test of bags and pouches
- Evaluation of flatness, curvature and wrinkling of plastic films - strip method
- Fat permeability/fat density
- Fat-repellent impregnation of paper, lipophobic properties, Kit test
- FINAT peel adhesion
- Gelboflextest/Brugger KFT
- Grammage, yield
- Impact resistance by free-falling dart method (Dart Drop), staircase method
- Impact resistance by the free-falling dart method – Instrumented puncture test
- Indentation hardness (Shore hardness)
- Linear dimensional changes/dimensional stability/temperature stability of films and sheets
- Printing ink adhesion (Tesa test)
- Printing inks and coatings/ lacquers- Fastness;Suitability tests, resistance, hot alkali resistance
- Puncture resistance, quasi-statical (temperature range - 40 up to + 120 °C)
- Roughness acc. Bendtsen
- Seal resistance of printings or coatings (heat resitance)
- Seal seam quality of PE- pouches or sacks (temperature range -40 to +120 °C)
- Seal strength, tensile test on strips (temperature range -40 to +120 °C)
- Sealing and welding properties of films, verification and comparison by laboratory sealing press
- Sealing seam strength of peelable bags, sacks, sealed packages with package testing device for determining the opening forces
- Sealing/welding properties of films/hot-tack test of films
- Shear strength of glued seams (temperature range - 40 to +120° C)
- Shrinkage of PE films (Betex tester)
- Smoothness according to Bekk
- Sterilisation/pasteurization in laboratory autoclave
- Storage test in temperature-controlled room under standard atmospheres23°C/ 50 % r.h.
- storage test/ accelerated aging in explosion protected heating chamber (controlled temperature)
- Storage test/accelerated ageing in climate chamber (controlled temperature and relative humidity)
- Storage test/accelerated ageing in lab drying oven or refrigerator (controlled temperature)
- Surface resistance/resistivity
- Tear resistance (also folded edges), (temperature range - 40 up to + 120 °C)
- Tear resistance (Elmendorf)
- Tensile test aluminium films
- tensile test films and laminates (temperature range -40 to +120 °C)
- Tensile test paper wet strength
- Tensile test paper, sealing strength of paper samples
- Tensile-impact strength
- Unpacking barness of cups (hollow bodies)
- Volume determination of carrier bags and pouches
- Water absorption of paper/Cobb test
- Weathering test - wet smear resistance of printed peat culture, substrate and humus packaging
- Weathering test/lightfastness - artificial irradiation in the laboratory device/UV test
- Wetting tension (e. g. for determination of Corona treatment intensity)
© 2024 Innoform Coaching GbR